Caractéristiques | S16cmR, S16emR | S16cm, S16em |
Concept de système d'alarme | Système modulaire hybride | |
Zones câblées à bord | 5/10 (doubler) | |
Entrée de détecteur de fumée à 2 fils | 1 | |
Zones sans fil embarquées | - | 16 |
Maximum de zones dans le système | 16 | |
PGM embarqué | 3 | |
Maximum PGM dans le système | 16 | |
Utilisateur + codes d'installation | 31+1 | |
Code de contrainte | Oui | |
Code d'utilisateur par défaut | Oui | |
Zone de commutateur à clé | Oui | |
Partitions | 4 | |
Partage "Partagé" (espace commun) | Oui | |
Minuteries du système | 16 | |
Nombre maximal de claviers / modules dans le système | 3 | |
Keypad compatibility | All SECOLINK keypads | |
Tampon du journal des événements | 256 (with keypad 512) | |
Interface with transmitters and communicators of other manufacturers | - | |
Protocole de bus de données | KRBUS | |
Type de détecteur "Roller" | Oui | |
Type de détecteur "Vibration" | Oui | |
Vitesse de la zone "Vibration" (sensibilité) | 0.01 - 0.25 sec. | |
Vitesse de zone normale (sensibilité) | 0.1 - 2.5 sec. | |
Type de boucle de zone (détecteur) | NC, NO, NC/EOL, NO/EOL, NC/DEOL, NO/DEOL, Vibration, Roller, Wireless | |
Mode d'armement | Loin, Max Away, Nuit, Reste. | |
Définition de la zone |
Entrée / sortie, entrée / sortie forcé, intérieur, nuit intérieure armée, suiveur, suiveur nuit armée, périmètre, instantané, contrôle PGM; 24h: cambriolage, panique silencieuse, panique audible, sabotage, incendie, fumée, bouton de tir, bouton médical, surveillance incendie, niveau d'eau bas, bourrage RF, gaz détecté, fuite d'eau, haute température, basse température | |
Attributs de zone | Activer le contournement, pas d'alarme, bras lorsque la porte est fermée, itinéraire d'entrée, sortie, vérification incendie, limitation des alarmes, limitation de la signalisation, pré-alarme, nuit armée | |
Définition PGM | Alarme incendie, alarme incendie / effraction, alarme antivol, alarme anti-sabotage, alarme technique, alarmes sélectionnées, carillon, violation de zone, statut de dérivation, anomalie sélectionnée, avertissement de sortie / entrée, état sortie / bras, état de bras complet, alimentation alimentation, alimentation d'énergie de feu, minuterie, commutateur mono / bi | |
Attributs PGM | Inversion, pulsation, verrouillage, pré-alarme, notification d'armement, notification d'échec d'armement, notification de désarmement, notification d'alarme effacée, armé en mode spécifique | |
Embedded communication module (communicator), additional services | ||
Modem versions1 |
|
|
Embedded-SIM (eSIM) | No | |
User SIM | Oui (size: micro SIM) | |
Extra services that are included in the final price of the product |
take full advantage of the SECOLINK Pro app2.
Note: to activate extra services, it is necessary to create a user account in ALARMSERVER.NET cloud and register the product by entering product's identification number "BI". | |
Notifications to the user, reporting to CMS using the user's SIM card | ||
Number of recipients for SMS, voice clip messaging | 5 | |
Alarm message for end user by voice clip | - | |
Voice guide for end user | - | |
SMS out (device >> phone) | Oui | |
SMS in (phone >> device) | Oui | |
SMS text language (device >> phone) | Can be changed using MASCAD PRO | |
Operation of SECOLINK PRO using SMS services: | ||
Android | plain text3 | |
iPhone | plain text3 | |
Number of recipients for internet messaging using app SECOLINK PRO | 10 | |
Requirements for online system control using the SECOLINK PRO app |
the product by entering the product identification number "BI";
| |
Push notifications | Oui5 | |
Reporting to Central Monitoring Station (CMS) | Oui | |
Reporting to CMS format | CID by GPRS/LTE Cat-M1 | |
Reporting protocols for CMS | E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA | |
Compatible with SG-SYSTEM II , III IP card | Oui | |
Maximum load and electrical characteristics | ||
Tension nominale de l'alimentation (AC) | ~18 - 20 V | |
Tension alternative minimale (Remarque: la tension d'entrée de ~ 16 V permet au panneau de commande de générer un courant de sortie de 0,5 A maximum) | ~16 V | |
Tension CA maximale (Remarque: une tension supérieure à ~ 22 V peut endommager le panneau de commande) | ~22 | |
Courant de sortie maximal à long terme du panneau de commande (I+AUX + I+BELL + I+PGM + Icharge de la batterie): | ≤0,7 A | |
Courant maximum du fusible de soufflage lent utilisé dans le courant alternatif primaire | 250 mA | |
Consommation d'énergie CA maximale | 150 mA | |
Tension minimale sur les sorties + AUX, + BELL | 12 V | |
Tension maximale sur les sorties + AUX, + BELL | 13,9 V | |
Courant maximum sur + AUX | +0,5 A | |
Courant maximum sur + BELL | +2 A | |
Courant maximum en -PGM1 | -0,15 A | |
Courant maximum en -PGM2 | -0,15 A | |
Court-circuit, protection contre les surcharges de + BELL, + AUX | Electronic | |
Charge de la batterie, + BELL, + mesure de courant AUX | Oui | |
Échec de la déconnexion de la batterie de secours (déchets) | Oui | |
Courant de charge maximum de la batterie | +0,2 A | |
Courant maximum du fusible de soufflage rapide utilisé dans le circuit de la batterie | 3,15 A | |
Le panneau de commande déconnecte la batterie quand sa tension est inférieure à | 9,5 V | |
Conformité opérationnelle | EN50131, Grade2 | |
Batterie de secours recommandée | 12 V, 2,2 - 7Ah | |
Dimensions hors tout L x H en mm | 145 x 77 | |
Respect de l'environnement | ROHS | |
Température de fonctionnement | -10oC jusqu'à +50oC | |
Remote programming of control panel settings | Oui | |
Statut de production | En production | En production |
Interface with PC | USB micro-B | |
Dernière version du firmware | ![]() | |
Wiring manual | ![]() | |
Programming manual (for keypad KM20Bx) | ![]() | |
Programming manual (for keypads KM24x, KM25) | ![]() | |
1 - GSM providers are planning to start 2G network shutdown in 2026-2028, so it is worth thinking about the future now. The S16emR and S16em control panels use communication modems that support both the current but aging 2G technology and the new LTE Cat M1 communication technology that will replace it in the future. | ||
2 - at the end of 6 months of a paid period, the user will be offered to renew the license. The license is renewed upon purchase of a WLCT voucher. The control of the control panel over internet will be disabled if the license will not be renewed. The user will still be able to control the control panel with SMS. You can buy the voucher at https://shop.secolink.eu | ||
3 - SMS messages from the control panel are not imported into the SECOLINK PRO app - they can be viewed using the SMS editing app on the phone. Lock icons (ARMED / DISARMED) are not displayed in the app. SMS commands are not performed in the background - SECOLINK PRO will „insert“ the control command for the user into SMS editing app and the user will need to tap on the button Send. | ||
4 - WLCT voucher can be purchased at https://shop.secolink.eu | ||
5 - ALARMSERVER.NET cloud services should be in use. WLCT voucher can be purchased at https://shop.secolink.eu |