Features WL800
Product type Universal communicator
Control panels supported by data interface • SECOLINK (control panels: PAS8xx, Pxx, S16xx, S32xx)
• DSC (control panels: PC5xx, PC5xxx, PC14xx, PC1565, PC16xx, PC18xx)
• PARADOX (control panels: SP4xxx, SP6xxx, SP7xxx, EVOxxx, MG5xxx,

SP5500+2,3, SP6000+2,3, SP7000+2,3)

Control panels supported by analog interface All control panels with PGM outputs / zone inputs
Additional services that are included in the final price of the product

The WL800 comes with 2 years of paid cloud services, allowing the user to take full advantage of the SECOLINK Pro app1.

Number of recipients for internet messaging using app SECOLINK PRO 10
Reporting to Central Monitoring Station (CMS)


(There are additional conditions. Contact CMS company)

Reporting to CMS format CID by Wi-Fi/Ethernet
Reporting protocols for CMS E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA
Compatible with SG-SYSTEM II , III IP card Yes
Wireless Network Standard 802.11b, 802.11g, 802.11n
Frequency 2,4 GHz
Authentication methods WPA/WPA2 PSK, PEAP, EAP-TLS
IP address Static or dynamic (DHCP)
In-built wired zones (inputs) on board 2
On-Board (open collector type) PGM 1
Maximum current into OUT -0,05 A
Power supply (DC)

9 - 14 V

Average current consumption 60 mA
Maximum current consumption 200 mA
Plastic casing Yes
Overall dimensions W x D x H in mm 78 x 50 x 19
Environmental compliance ROHS
Operating temperature From -10oC to +50oC
Production status In production
Interface with PC Wi-Fi (wireless access point), USB (USB to TTL adapter is required)
Firmware update

• Using USB to TTL adapter and software Firmware upgrade tool RS
• Wi-Fi - using SECOLINK keypad menu or using button (release on 2nd blink)

Manuals, software, latest firmware version  Download

   1 - at the end of the paid period, the user will be offered to renew the license. The license is renewed upon purchase of a WLCT voucher. Without renewing

the license, the WL800 will only be usable to report to the CMS receiver. Before buying the WL800 it is necessary to check whether the price of WLCT voucher is acceptable. The voucher can be purchased at shop.secolink.eu

  2 -  the SERIAL port must be unlocked before using the panel with the communicator (firmware version v.1.16 or higher). The SERIAL can be unlocked  

for an additional fee. For more information, contact your local distributor or send an email to our support team: support@secolink.eu

  3 -  upgrade the control panel firmware to the latest version (v1.21.003 or later). The control panel with the stock version does not send all events to

SERIAL port.